• Type: Electret Condenser
  
• Frequency Response: 20Hz-20kHz
  
• Polar Pattern: Cardioid
  
• Output Impedance: 179 ohms
  
• Sensitivity (at 1kHz, open circuit voltage): -48.0 dBV/Pa (4.0 mV)
  
• Maximum SPL (1kHz at 1% THD) 1,000 ohm load: 144dB
  
• Signal-to-Noise Ratio (referenced at 94dB SPL at 1kHz): 64dB
  
• Dynamic Range (at 1kHz) 1,000 ohm load: 114dB
  
• Common Mode Rejection (20Hz-20kHz): 50 dB
  
• Clipping Level (1kHz at 0.25% THD): 1,000 ohm load: 1.0dBV (1.26V)
  
• Self Noise (typical, equivalent SPL, A-weighted): 30dB SPL
  
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
  
• Weight: 0.6 oz.
  
• Connector: 3-pin XLR, male, balanced
  
• Power Requirements: 11-52Vdc phantom, 3.6mA

Specification :